manufacturer part number: 30-9164B
This slide switch is great for replacing a broken or missing on/off switch on equipment, or for integrating into your own project. The switch is dual pole, dual throw, on-on, but can be used as a simple on-off switch by only using 2 of the terminals. A flange makes this switch easy to mount in a project box or panel. Tapped screw holes are provided on each flange for a 2-56 screw (included).
Overall Dimensions: 7.5mm Wide x 15.32mm Long x 18mm high (overall). Mounting flange is 7.5mm x 23mm, screw holes on 19mm centers. Switch actuator is 7mm high and travel is 3.75mm.
NOTE: Though these switches are pictured with screws, they do NOT come from the manufacturer with screws anymore and none will be included because of this!
QTY: 1 x DPDT Miniature Slide Switch On-On (or Off) 6A
||Solder Terminals for 24AWG + Smaller Wire
||6A / 125VAC
|Initial Contact Resistance:
||5 Meg ohm (Max)
||100 Meg Ohm (Min)
||1000V AC for 1 minute
||Bronze, Silver Plated
||Copper, Silver Plated