manufacturer part number: 30-10835
This small, light-sensitive switch is simple to hook up and can control loads up to 250 Watts. It is normally used as a "dusk to dawn" sensor or switch, turning on landscape or outdoor lighting at dark and back off again in the morning. It can be used with most loads, but inductive loads work best (incandescent bulbs, halogen lights, etc). LED bulbs work well but CFLs should be avoided but will work if de-rated to 60 watts. Easy to install with color-coded wire leads. Connect the sensor to the hot and neutral wires, then connect the red wire to the hot side of your load (replaces the hot ac wire normally connected to your device). Weather resistant, can be panel mounted in a 3/8" hole (for the sensor).
||6" Wire Leads, 18AWG
||On at Dark
||Indoor / Outdoor
||32mm (Length) x 34mm (Width) x 30mm (Tall)