MG Ferric Chloride Solution

Part #: {{ products[active_product_id].sku }}

Part #: N/A

Add Quantity: {{ quantity_selected }} Edit Quantity

Product Details:

{{ highlight }}

Tap For Full Product Description

Hide Full Product Description

Product Description

PLEASE NOTE: THIS PRODUCT CANNOT BE SHIPPED BY AIR - IT MUST SHIP BY UPS GROUND ONLY

MG Ferric Chloride Solution - 1 Liter
MG Part Number: 415-1L

Copper Etchant Solution
Ready to use solution designed for etching printed circuit boards and other metals. Recommended for use with M.G. Chemicals Professional Etching Process Kit (MG-416-E) and M.G. Economy Etching Process Kit (MG-416-ES). Note: Do not dilute this product with water.
Directions:
Immerse copper board in solution and agitate until etching action is completed. Ferric Chloride can etch up to a maximum of 100g of copper per liter of solution (.33 square meters or 3.5 square feet of 1 oz copper clad board). Etching process can be sped up by heating the solution to a temperature no higher than 55°C (135°F).

General Specifications:
Phase:	Ferric chloride (Fecl3) liquid solution
Specific Gravity:	1.4
Molecular Weight:	162.21
Appearance:	dark brown
Boiling Point:	106 °C
pH (5% by volume):	1.0-2.0
Freezing Point:	0 °C
Technical Specifications:
% FeCL3:	38.8
%FeCL2:	0.20
%HCL:	0.18
Insolubles:
Metal Analysis:
Metal	Result (mg/Kg)
Arsenic	N/D
Bariuum	N/D
Beryllium	4.8
Cadmium	N/D
Chromium	64
Copper	77
Antimony	N/D
Mercury	N/D
Magnesium	15
Manganese	410
Silver	N/D
Nickel	24
Titanium	18
Lead	59
Selenium	N/D
Zinc	8.3
Vanadium	5.8
Sulfur	18
Thallium	2.7
Operating Conditions
Maximum Copper holding capacity	100 grams / liter or (.33 square meters or 3.5 square feet of 1 oz copper clad board)
Etch rate	175-200 µin /minute @ 50-55 °C (µin= microinch)
Temperature	50-55 °C

The MSDS document can be found: HERE
QTY: 1 x 1 Liter Bottle

Click here to read the California regulatory warning.

Vetco Electronics • 425-641-7275