Vetco Electronics • 425-641-7275

TOP
Browsing as guest
Log in

Back

Part #: {{ products[active_product_id].sku }}

Part #: N/A

Add Quantity: {{ quantity_selected }} Edit Quantity

Product Details:

  • {{ highlight }}


Tap For Full Product Description
Hide Full Product Description

Product Description


Silicone Heat Transfer Compound (Heatsink Grease) - 4g
MG Chemicals Part Number: 860-4G

As with most types of grease, a little bit goes a long way. In fact, this small 4 gram package is probably more than enough to cover several heatsinks.

Designed for use in transferring heat away from electrical and electronic devices such as; transistors, power diodes, semi-conductors, ballast's and thermocouple wells. High thermal conductivity, high dielectric constant, high dissipation factor, use with heat sinks or metal chassis, will not dry or harden. Contains zinc oxide and polydimethyl siloxane.

Features:
  • High thermal conductivity
  • High dielectric constant
  • High dissipation factor
  • Use with heat sinks or metal chassis
  • Will not dry or harden
  • Contains zincs oxides and polydimenthyl siloxane

Physical Properties Test Method Silicone 860
Appearance Visual White paste
Consistency ASTM D 217 ---
Specific Gravity @ 25°C (77°F) 2.3 minimum
Bleed % 24 hours @ 200°C FTM-321 2.0% maximum
Evaporation 24 hours @ 200°C FTM-321 2.0% maximum
Dropping Point ASTM D-566 >260 °C [>500 °F]
Min. operating temp. 55°F/48°C
Max. operating temp. 200°C (consistent) 300°C (intermittent)
Electrical Properties Test Method Silicone 860
Thermal Conductivity Hot Wire Method Heat Flow #36°C in W/m·K (BTU in /(hr ft2 F))
0.657 (4.56)
Dielectric Strength (0.05l gap) ASTM D-149 400 V/mil
Dielectric Constant @ 1000 Hz ASTM D- 150 3.81
Dissipation Factor @ 1000 Hz ASTM D 150 0.0032
Resistivity @ 21°C ASTM D 150 1.5 x 1015 Ohm•cm

QTY: 1 x 4g Packet of Silicone Heat Transfer Compound


Click here to read the California regulatory warning.